High Temperature Inorganic Glue for Ceramic and Aluminosilicate

• Type: C-2, C-3, Cps
• Temperature: 1400c, 1700, 900c
• Usage: Ceramic Glue
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: YN-049
• Transport Package: Plywood Case
• Specification: CUSTOMIZED
• Trademark: Yunnuo
• Origin: China
• HS Code: 8547100000

Product Description

Property of condensate	C-2	C-3	CPS cupric oxide
Color	gray	gray	black
Heat resistant temperature C	1730	1460	980
Hardness	Hard,brittle	Hard,brittle	Hard,brittle
Electrical properties	Good insulation performance at high temperature	Good insulation performance at high temperature	Good insulation at room temperature
Medium resistance	Oil resistant, acid and alkali resistant, not resistant to boiling water	Oil resistant, acid and alkali resistant, not resistant to boiling water	Oil resistant, acid and alkali resistant, not resistant to boiling water
Coefficient of linear expansion	Similar to ceramic(80×10-6/C)	Similar to steel(12.9×10-6/C)	Close to steel, Slightly contracted
Socket strength / tensile strength (steel-steel)Mpa	82/37	79/34	96/-
Applied range	High-temperature instrumentation, electronics, temperature-measuring element coating and potting, high-temperature anti-oxidation coating of metal materials, ceramics and other high-temperature bonding	Bonding and potting of high temperature resistant metal parts, high temperature oxidation resistant coating of metal materials, high temperature resistant bonding of metal materials	Metal sleeve sticking, the bonding of tool measuring tools
Proportion of glue solid phase	1.6-2.5g	1.6-2.5g	3.5-5.5g
Proportion of glue liquid phase	1ml(about 1.39g)	1ml(about 1.39g)	1ml (about 1.7g)
Curing procedures	Room temperature 12-24 hours → 80C 2 hours → 150C 2 hours, cool slowly	Room temperature 12-24 hours → 80C 2 hours → 150C 2 hours, cool slowly	Slow heating,→ 80C 2 hours → 150C 2 hours, cool slowly
Net weight	500g	500g	750g

HT-CPS high temperature structural adhesive

Physical state: powder + liquid
Operating time: 30min
Curing conditions: 1. room temperature 12h; 2.80 C 2h; 3.150 C 2h
Colour: Black
Density (g/cm3): 3.5
Shear strength (MPa) GB / T7124-1999: 86 (socket)
Impact strength (J / cm2) GB / T6328-1986: 8
Tensile strength (MPa) GB / T6329-1996: 38.5
Peel strength (N / cm) GB / T2791-1981: ---
Working temperature (C): -196 ~ 980
Heat-resistant temperature: 980 ºC
Weight: 750g per group

Material: Inorganic copper oxide, temperature resistance 980 ºC.

Uses: Used for bonding various hard alloy and ceramic turning tools, milling cutters, drills or gear cutters. The socket strength
is extremely high, which can be used to make extension rods and repair defects in high temperature casting conditions.

Use operation
1. Roughen the bonding surface and remove rust, oil and grease. The joint design is best with socket.
2. Glue adjustment: The solid and liquid phases of various types of glue are adjusted according to the ratio of the technical index table, and it should be adjusted to a uniform and flowable paste. CPS copper oxide inorganic glue should not be excessively adjusted each time. It is best to adjust the glue on the containers (such as copper) that dissipate quickly.
3. Curing with glue

Apply (fill) the glue to the surface to be bonded (sealed), and apply a little contact pressure to cure it after assembly. If the
strength is not high and medium resistance is not required, it can be cured at room temperature. Otherwise, please follow the curing procedure of the technical specification table.

 

Product name: HT C-2 ultra high temperature repair agent
Physical state: solid+liquid
Operating time: 30min
Curing conditions: 1.) Room temperature 12h; 2.) 80C -150C 2h; 3.) Slow cooling
Color: off-white
Density (g /cm3): 1.4
Compressive strength (MPa) GB / T1041-1992: 82 (socket strength)
Shear strength (MPa) GB / T7124-1999: 37 (tensile strength)
Bending strength (MPa) GB / T1024-1992:-
Insulation strength (kv / mm) GB / T2411-1980: 30
Working temperature (C): -60 ~ 1730
Net weight: 500g two-component

Uses: Inorganic ceramic material, temperature resistance 1730 C. It can repair equipment working under high temperature
conditions, such as repairing damaged or broken acid resistant tanks, blast furnace lining, steel ingot molds and other equipment,burner ignition devices, potting of molten steel temperature probes, etc.